M-PRINT Model

Production of dental models

M-PRINT Model

Production of dental models

Liquid zur Herstellung 3D-gedruckter Modelle 3D-gedrucktes unbezahntes Modell aus M-PRINT Model [Translate to Englisch:] [Translate to Englisch:]

Opaque, light- and moisture-stable, light-curing 3D printing resin for the production of very precise, true-to-detail master, stump and / or functional models with finest and smooth surface structure.

  • Without fillers and pigments
  • High precision
  • Ready 2 Print - No need to shake it up
  • Designed for tray-based photopolymerisation at 385 / 405 nm

Characteristics

  • Very dimensionally stable, precisely grindable
  • Preparation lines optimally visible through opacity
  • High construction precision - for an excellent fit of model stumps
  • Free from MMA 
  • High efficiency - thanks to the low-viscosity setting of the resin for lower material consumption and short post-processing

Material properties

Property Value Test Method
Acrylate mixture
Viscosity 950 ± 100 mPa·s ISO 3219 (23 °C, 5 - 100 s-1)
End product
Flexural strength 68 ± 2 MPa ISO 178
Modulus of elasticity 1600 ± 100 MPa ISO 178

M-PRINT 3D printing liquids are generally compatible with DLP printers operating at a wavelength of 385 nm and, to some extent, with LCD printers operating at 405 nm. Print parameters are available for the following printers.

rapidshape

  • D20+ 
  • D30+ 
  • D50+

The material parameters are pre-installed and/or available in the printer manufacturer's material library. (Visit rapidshape for more information.)

Asiga

  • Pico
  • MAX
  • PRO
  • PRO 4K
  • Ultra
  • Max 2

The material parameters are pre-installed and/or available in the printer manufacturer's material library. (Visit Asiga for more information.)

Straumann

  • PRO20
  • P30+
  • P50+

The material parameters are pre-installed and/or available in the printer manufacturer's material library.

SHERA

  • SHERAprint 20 pro
  • SHERAprint 30
  • SHERAprint 50

The material parameters are pre-installed and/or available in the printer manufacturer's material library.

DMG

  • DentaMile Desk RS-5
  • 3Delite

The material parameters are pre-installed and/or available in the printer manufacturer's material library.

W2P

  • SolFlex 163
  • SolFlex 350
  • SolFlex 363+
  • SolFlex 650
  • SolFlex 250 UHD
  • SolLab 370

Please find the printing parameters (build styles) for M-PRINT 3D printing materials here.

Nexa 3D

  • XiP

The material parameters are pre-installed and/or located in the printer manufacturer's material library.

Carima

  • IMD

The material parameters are pre-installed and/or located in the printer manufacturer's material library.

VOCO

  • SolFlex 170
  • SolFlex 350
  • SolFlex 650

Please find the printing parameters (build styles) for M-PRINT 3D printing materials here. 

DEKEMA

  • trix print²

The material parameters are pre-installed and/or available in the printer manufacturer's material library. (Visit DEKEMA for more information.)

Anycubic

  • Photon Mono M5
  • Photon Mono X 6K

Recommendations for print parameters can be found in the downloads section of the relevant product page.

Elegoo

  • Saturn 3 ultra
  • Mars 4 ultra

Recommendations for print parameters can be found in the downloads section of the relevant product page.

Phrozen

  • 8K Mini

Recommendations for print parameters can be found in the downloads section of the relevant product page.

MiiCraft

  • Alpha 2K
  • Alpha 2.5K
  • Prime 110/150, Prime+

The material parameters are pre-installed and/or located in the printer manufacturer's material library.

Shining 3D

  • AccuFab-L4D

Recommendations for print parameters can be found in the downloads section of the relevant product page.

Zirkon Zahn

  • P4000

Recommendations for print parameters can be found in the downloads section of the relevant product page.

The users themselves are responsible for the use of the product. Merz Dental assumes no liability and / or guarantee for the use of components that are not part of the system and / or for components that have not been tested and for incorrect results, as the manufacturer has no influence on processing.

Applications

  • Models
  • Model stumps
  • Models for splints and functional models

 

Post-processing

Post-processing should be performed immediately after completion of printing to minimise the risk of contamination and unwanted polymerisation of material still present on the surface.

Prozess step Time required (min)
1 Allow the design still in the printer after the printing process has been completed to drip off. 10
2 Remove construction platform, remove design and carefully cut off supports. 5
3 Clean the design in a closed container with cleaning fluid (propan-2-ol; isopropanol ≥ 99%), such as M-PRINT Wash, for 5 minutes in an ultrasonic bath. Note: Do not heat the design in the cleaning solution and do not leave it in the solution for a long period. 5
4 Use a pair of tweezers to remove the printed part from the cleaning fluid, blow it off with compressed air if necessary, and let it dry. Recommendation: Dry the design in an oven at 40 °C Note: Residues of the alcoholic cleaning fluid on the surface lead to a softer and sometimes scratch-sensitive surface after post-curing. 30
5 Post-curing of the design in the Otoflash G171 light curing device with 2 x 2400 flashes - turn the design between the two cycles. Recommendation: Use the nitrogen (protective gas) function, as this minimises oxygen inhibition and thus leads to improved surface and material properties. Observe the manufacturer's specifications for the device. 8
6 Manual post-processing, e.g. cleaning of the supports and polishing with commercially available rotating instruments for plastic processing. Note: To prevent inaccurate fitting after polymerisation, avoid excessive heat development during finishing and polishing. Depending on the design

Range

1,000 g bottle

Colour:

  • ash-gray
  • taupe-gray
  • sand

Designed for the tray-based photopolymerisation at 385 nm

Downloads

M-PRINT Model (Instructions for Use)

PDF 936 KB

M-PRINT booklet (en) (Product Information)

PDF 2.58 MB

Merz Dental Catalogue (en) (Product Information)

PDF 10.75 MB

M-PRINT Model (Safety Data Sheet)

ZIP 14.79 MB

Anycubic (en) Photon Mono - M-PRINT Model (Product Information)

ZIP 615 KB

Phrozen (en) 8K Mini - M-PRINT Model (Product Information)

ZIP 642 KB

Shining 3D (en) AccuFab-L4D - M-PRINT Model (Product Information)

ZIP 995 KB

Zirkonzahn (en) P4000 - M-PRINT Model taupe-gray (Product Information)

PDF 196 KB

Elegoo (en) Saturn 3 ultra / Mars 4 ultra - M-PRINT Model (Product Information)

ZIP 1.71 MB