M-PRINT Surgical guide HT

Sterilisable surgical drilling templates

M-PRINT Surgical guide HT

Sterilisable surgical drilling templates

Liquid zur Herstellung 3D-gedruckter sterilisierbarer Bohrschablonen 3D-gedruckte sterilisierbare Bohrschablone aus M-PRINT Surgical guide HT mit Supportstrukturen

Biocompatible, steam-sterilisable, liquid, light-curing acrylate-based premium resin especially tailored for surgical drilling templates for exact contouring in the area of drill sleeves.

  • Medical Device Class I
  • Without fillers & pigments
  • Ready 2 Print - No need to shake it up
  • Designed for tray-based photopolymerisation at 385 nm

Characteristics

  • Biocompatibility tested according to EN ISO 10993-1
  • Dimensionally stable, for the exact positioning and fixation of the drill sleeves, for surgically precise and controlled insertion
  • Very good precision and a perfect fit for the respective bone and soft tissue conditions
  • Warp resistant, for the surgically precise and safe insertion of dental implants
  • High rigidity, low deformation due to a very high modulus of elasticity
  • Steam sterilisable up to 134 ° C
  • Colour spring green for reliable visual control of the correct fit through good contrast in the oral cavity
  • Easily polishable
  • Mucous membrane friendly

3D Printers

M-PRINT 3D printing liquids are generally compatible with DLP printers operating at a wavelength of 385 nm and, to some extent, with LCD printers operating at 405 nm. Print parameters are available for the following printers.

rapidshape

  • D20+ 
  • D30+ 
  • D50+

The material parameters are pre-installed and/or available in the printer manufacturer's material library. (Visit rapidshape for more information.)

Asiga

  • Pico
  • MAX
  • PRO
  • PRO 4K
  • Ultra
  • Max 2

The material parameters are pre-installed and/or available in the printer manufacturer's material library. (Visit Asiga for more information.)

Straumann

  • PRO20
  • P30+
  • P50+

The material parameters are pre-installed and/or available in the printer manufacturer's material library.

SHERA

  • SHERAprint 20 pro
  • SHERAprint 30
  • SHERAprint 50

The material parameters are pre-installed and/or available in the printer manufacturer's material library.

DMG

  • DentaMile Desk RS-5
  • 3Delite

The material parameters are pre-installed and/or available in the printer manufacturer's material library.

W2P

  • SolFlex 163
  • SolFlex 350
  • SolFlex 363+
  • SolFlex 650
  • SolFlex 250 UHD
  • SolLab 370

Please find the printing parameters (build styles) for M-PRINT 3D printing materials here.

Carima

  • IMD

The material parameters are pre-installed and/or located in the printer manufacturer's material library.

VOCO

  • SolFlex 170
  • SolFlex 350
  • SolFlex 650

Please find the printing parameters (build styles) for M-PRINT 3D printing materials here.

DEKEMA

  • trix print²

The material parameters are pre-installed and/or available in the printer manufacturer's material library. (Visit DEKEMA for more information.)

Anycubic

  • Photon Mono X 6K

Recommendations for print parameters can be found in the downloads section of the relevant product page.

Elegoo

  • Mars 4 ultra

Recommendations for print parameters can be found in the downloads section of the relevant product page.

MiiCraft

  • Alpha 2K
  • Prime 110/150, Prime+

The material parameters are pre-installed and/or located in the printer manufacturer's material library.

The users themselves are responsible for the use of the product. Merz Dental assumes no liability and / or guarantee for the use of components that are not part of the system and / or for components that have not been tested and for incorrect results, as the manufacturer has no influence on processing. 

Applications

  • Drilling templates for the surgically precise and safe insertion of dental implants
  • Positioning templates

 

Material properties

Property Value Test Method
Viscosity 650 ± 100 mPa·s ISO 3219
Flexural strength 130 ± 5 MPa ISO 10477
Modulus of elasticity 3150± 130 MPa ISO 10477*
*based on

Range

1,000 g bottle

Colour:

  • spring-green

Designed for the tray-based photopolymerisation at 385 nm